125°C Operation High-Withstand Voltage, High-Speed,
Zero Crossing Latch Hall Effect IC

S-576Z B Series

pc-slide-12-en2

 BLDC Motor Requirements


  • For robots and high-performance home appliances
    Low noise & quiet operation

  • Appliances must be energy saving.
    Low power consumption

  • Must be design-friendly
    Low profile & compact

Zero Crossing Latch Hall Effect IC Meets these requirements


The new generation of Hall effect ICs 
reduces design work
 and produces high-performance motors

S-576Z B Series Datasheet(For General Use)

BUY NOW

A Zero Crossing Latch Hall effect IC is a latch type Hall effect IC that uses a world first detection method to change the output signal at the zero-crossing point where polarity changes.

≫ What is a Zero Crossing Latch Hall effect IC?

Zero Crossing Latch - a New Detection Methodology which turns a new page in brushless DC motor development

3 Advantages the Zero Crossing Latch Hall Effect IC Brings to Motor Design

3 Advantages the S-576Z series Brings to Motor Design


Rotation angle detection is not easily impacted by changes in magnetic flux

Rotation angle detection is not easily impacted by changes in magnetic flux

The Hall effect IC for BLDC motor control applies the magnetic flux density from rotating magnets.

The Zero Crossing Latch Hall effect IC changes the signal output at the point polarity changes(zero crossing point), without depending on the magnitude of the magnetic flux density.

Zero cross point is constant because it is not affected by changes in the distance between the magnets and the sensor or changes in temperature.

The Zero Crossing Latch Hall effect IC simplifies complex software calibrations and tolerance calculations. These advantages further simplify the design of DC motors with constant high efficiency and low noise characteristics.

img-zcl-s576z-02-en

 [World’s Top Class] Compact and Low Profile Motor Housing

To make a compact and low-profile motor housing, it is essential to reduce the size of the magnets and the distance between the sensor PCB and the magnets.

Zero Crossing Latch technology ensures detection even of magnetic flux generated by tiny magnets. To apply this technology to its fullest possible extent, the S-576Z B Series IC is made available in a surface mount package that enables highly flexible placement.

This new package is the TSOT-23-3S (2.9 x 2.8 x t0.8mm), the world’s lowest profile package, which shrinks the distance between the magnet and the PCB to the footprint of the world standard SOT-23-3 (2.9 x 2.8 x t1.3mm) package.

img-zcl-s576z-03-1

 Specifications defined for designer

・Static Electricity Countermeasures

To cope with the harsh environment during motor installation, it has a dielectric withstanding voltage of HBM: 8,000V.

・Built-in Pull-up Resistor

S-576Z B Series integrate a 1.2kΩ pull-up resistor, which is ideal for reducing the delay in the rise and fall times of signal output.

・Wide Operating Voltage Range

The wide operating voltage range of 2.7V - 26.0V ensures stable sensor signal output at motor start and stop.

Application Examples


Robots (brushless DC motors for vertical movement and operation of joints)

Electric power tools, cordless vacuum cleaners, etc.

High energy efficiency, reliability, low-noise performance and other characteristics make it ideal in consumer products that require granular control.

Hall effect ICs for Motors


Features


Product name S-576Z B Series
  (for general use)
Power supply voltage range*2 VDD=2.7V ~ 26.0V
Pole detection Zero Crossing Latch detection
Output logic
 (optional)
VOUT = “L” at S pole detection
VOUT = “H” at S pole detection
Output form
(optional)
Nch open-drain output
Nch driver + built-in pull-up resistor (1.2 kΩ typ.)
Zero crossing latch point BZ=0.0mT typ.
Release point (S pole) BRS= 3.0 mT typ
BRS= 6.0 mT typ
(Optional)
Chopping frequency fC= 500kHz typ.
Output delay time tD=8.0μs typ.
Operation temperature range Ta = −40°C ~ +125°C
Datasheet S-576Z B Series Datasheet(For General Use)

 

Web shop (Online Samples)




S-576Z B Series (Zero Crossing Latch Hall effect IC)

chip1stop corestaff MOUSER ELECTRONICS Digi-Key

for the latest infomation

 

qr-code