125°C Operation High-Withstand Voltage, High-Speed,
ZCLTMHall Effect IC
S-576Z B Series
BLDC Motor Requirements
- For robots and high-performance home appliances
Low noise & quiet operation
- Appliances must be energy saving.
Low power consumption
- Must be design-friendly
Low profile & compact
A ZCL (=Zero Crossing Latch) Hall effect IC is a latch type Hall effect IC that uses a world first detection method to change the output signal at the zero-crossing point where polarity changes.
≫ What is a ZCL Hall effect IC?
Three Advantages the ZCL Hall Effect IC Brings to Motor Design
Rotation angle detection is not easily impacted by changes in magnetic flux
The Hall effect IC for BLDC motor control applies the magnetic flux density from rotating magnets.
The ZCL Hall Effect IC changes the signal output at the point polarity changes(zero crossing point), without depending on the magnitude of the magnetic flux density.
Zero cross point is constant because it is not affected by changes in the distance between the magnets and the sensor or changes in temperature.
The ZCL Hall effect IC simplifies complex software calibrations and tolerance calculations. These advantages further simplify the design of DC motors with constant high efficiency and low noise characteristics.
[World’s Top Class] Compact and Low Profile Motor Housing
To make a compact and low-profile motor housing, it is essential to reduce the size of the magnets and the distance between the sensor PCB and the magnets.
ZCL technology ensures detection even of magnetic flux generated by tiny magnets. To apply this technology to its fullest possible extent, the S-576Z B Series IC is made available in a surface mount package that enables highly flexible placement.
This new package is the TSOT-23-3S (2.9 x 2.8 x t0.8mm), the world’s lowest profile package, which shrinks the distance between the magnet and the PCB to the footprint of the world standard SOT-23-3 (2.9 x 2.8 x t1.3mm) package.
Specifications defined for designer
・High ESD Performance
To cope with the harsh environment during motor installation, it has anti-ESD performance of HBM:8,000V.
・Built-in Pull-up Resistor
The motor integrates a 1.2kΩ pull-up resistor, which is ideal for reducing the delay in the rise and fall times of signal output.
・Wide Operating Voltage Range
The wide operating voltage range of 2.7V - 26.0V ensures stable sensor signal output at motor start and stop.
Robots (brushless DC motors for vertical movement and operation of joints)
Electric power tools, cordless vacuum cleaners, etc.
High energy efficiency, reliability, low-noise performance and other characteristics make it ideal in consumer products that require granular control.
Hall Effect Latch IC Lineup
|Product name||S-576Z B Series|
|(for general use)|
|Power supply voltage range*2||VDD=2.7V ~ 26.0V|
|Pole detection||ZCL detection|
|VOUT = “L” at S pole detection
VOUT = “H” at S pole detection
|Nch open-drain output
Nch driver + built-in pull-up resistor (1.2 kΩ typ.)
|Zero crossing latch point||BZ=0.0mT typ.|
|Release point (S pole)||BRS= 3.0 mT typ
BRS= 6.0 mT typ
|Chopping frequency||fC= 500kHz typ.|
|Output delay time||tD=8.0μs typ.|
|Operation temperature range||Ta = −40°C ~ +125°C|
ZCL is a trademark of ABLIC Inc.